Your IP address is listed on your device's network settings screen — on Windows 11 under Settings > Network & internet > Properties, on iPhone under Settings > Wi-Fi > the "i" icon, and by typing whatsmyip into Google. What most people miss is that these routes return four different numbers, and the one you actually need depends on whether you're troubleshooting, setting up remote access, or configuring port forwarding.
What an IP Address Actually Is and Which of the Four Numbers You Need
An IP address is the numeric label a network uses to deliver traffic to your device, and you have more than one at any moment. Every computer or phone carries a local address assigned by your router, a public address assigned by your internet provider, and potentially IPv6 versions of both running alongside the older IPv4 format.
The local address, called private or LAN IP, almost always sits in one of three reserved blocks defined in RFC 1918, the standards document that set the ranges: 192.168.x.x, 10.x.x.x, or 172.16.x.x through 172.31.x.x. Your router hands these out through DHCP, the automatic assignment protocol, and they're meaningless outside your home network.
The public address is what the wider internet sees. Your internet service provider assigns it, and it usually belongs to the provider rather than to you. On most connections it's shared or rotates, which is why it can change after a router reboot.
You also have IPv6 addresses if your provider supports that newer format. IPv6 uses 128 bits instead of 32, shown as eight groups of hexadecimal characters, and most devices generate one permanent address plus rotating privacy addresses. If a banking site flags a "new device" every few days, a rotating IPv6 privacy address is a common and harmless explanation.
Then there's the loopback address, 127.0.0.1, still called localhost. It exists on every machine and only ever refers to the machine itself. Developers type it into browsers constantly; normal users rarely need it, but it shows up in tutorials and confuses people who think their computer has four IP addresses.
Find Your Local IP on Windows 11 and Windows 10 in Three Clicks
Windows 11 returns your Wi-Fi IP in three clicks: Settings > Network & internet > Wi-Fi > the name of your network > Properties, where "IPv4 address" sits in the Properties list. Windows 10 reaches the same value through Settings > Network & Internet > Status > View your network properties.
Use that settings route when you want to read the number calmly. For anything scriptable or when the graphical menu has changed after an update, the Command Prompt route is more durable across Windows versions.
1: Press Windows key + R, type cmd, and press Enter. 2: Type ipconfig and press Enter. 3: Find the adapter you're using — "Wireless LAN adapter Wi-Fi" or "Ethernet adapter" — and read the line labeled "IPv4 Address." 4: Note the "Default Gateway" line too; that's your router's local address and it matters for port forwarding.
The output lists every adapter including virtual ones from VPNs and Hyper-V, so pick the adapter that matches your connection. If you see only a 169.254.x.x address, that's an APIPA self-assigned address meaning DHCP failed — reboot the router or reconnect, because Windows couldn't reach it. The modern ipconfig also supports /all, which reveals your DHCP server and MAC address, useful when you're reserving an address.
Trace the Public Address Your Provider Shows the Internet
The fast route beats every settings menu: Google "whatsmyip" and the result box shows your public IPv4 address at the top. Other search engines and sites like WhatIsMyIPAddress and IP Chicken show the same number, and they'll also display your IPv6 address if your connection has one.
Different lookup sites can disagree. If your connection routes through a VPN, a proxy, or a provider using carrier-grade NAT — where many customers share one public address — one site may show the VPN exit and another the underlying provider address. That spread is informative rather than broken: it tells you exactly where the traffic exits.
Carrier-grade NAT deserves a warning sign. If your public address falls in 100.64.0.0/10, the block reserved for shared provider addressing, you cannot port forward no matter what your router offers. Game servers, home cameras, and remote-desktop setups all break behind that block. Ask your provider for a static public address or a different plan, because no amount of router configuration fixes it.
Check whether your address is static. Most residential providers rotate addresses every few days or on reboot; business plans usually offer a fixed address for a fee. Log the address now, reboot the router, and compare. If it changes, any service that relies on your address — remote access, a home server, smart-home integrations — needs dynamic DNS, a service that keeps a hostname pointed at a changing address.
Copy the Private Address on iPhone and Android Without Guessing
On iPhone, open Settings > Wi-Fi, tap the blue "i" circle beside your connected network, and read the "IP Address" line under the IPV4 ADDRESS section. On Android, the path varies by manufacturer: Pixel phones use Settings > Network & internet > Internet > the gear icon beside the connected network, where the address appears under Network details.
The iPhone screen also shows a "Private Wi-Fi Address" toggle and a separate "Wi-Fi Address" field — that's a MAC address, not an IP, and turning the private option on randomizes the hardware address per network. Android 10 and later do the same thing by default under "Randomized MAC." Neither affects your IP, but both explain why a router's device list shows unfamiliar hardware.
Android settings menus come in more flavors than iPhone menus because Samsung, Google, and other manufacturers each reskin the top levels. Samsung devices route through Settings > Connections > Wi-Fi > gear icon > View more. If the menu has moved, the reliable fallback is a browser visit to a lookup site, or any network-diagnostics app that reads the address the phone reports.
Failure cases on mobile are common. If the phone shows an address starting with 169.254, it failed to lease one from the router. If it shows a 192.168 address but pages won't load, you're on the local network only — the problem is the router's upstream connection, not the phone. Toggling Wi-Fi off and on forces a fresh DHCP request and fixes more of these than it should.
Check a Mac and a Linux Machine in Under a Minute
On a Mac, hold Option and click the Wi-Fi menu bar icon — the dropdown shows your IP address right under the network name, no System Settings trip needed. If you prefer the panel, System Settings > Network > Wi-Fi > Details works, and the terminal command ipconfig getifaddr en0 returns the same value.
The Option-click trick is worth memorizing because it also reveals the router's address, your channel, and signal strength. Recent macOS versions label the field "IP Address" and also list an IPv6 address below it. If you're on Ethernet, the same trick doesn't exist — check System Settings > Network > Ethernet or run the terminal command with en1 or list interfaces first with ifconfig.
Linux users have the cleanest single command: ip addr show (or the shorter ip a) prints every interface and its address, with the active one usually second on the list. The older ifconfig tool still works on many distributions but lives in the deprecated net-tools package, so newer installs may not include it. For a one-line answer, hostname -I prints just the local addresses.
Watch for virtual interfaces on Linux machines running Docker or virtual machines. The docker0 bridge holds something like 172.17.0.1, which is the container network's gateway rather than your machine's address on your home network. The same confusion hits Windows users with VMware or Hyper-V adapters, and Mac users running Parallels. Choose the interface matching your physical connection.
Find the IP of a Router, Printer, or Another Device on Your Network
Use the router's admin page for the most complete picture. Start by finding the router's own address — the default gateway from ipconfig, or the value shown on the Option-click dropdown on a Mac — then type it into a browser and log in. The interface varies by manufacturer, but the client or attached-device list names every connected device with its local IP. Netgear calls it "Attached Devices," TP-Link uses "DHCP Client List," and Asus labels it "Network Map."
If the router's password is long gone, scan from your own machine instead. On Windows, type arp -a in Command Prompt to list addresses the computer has recently contacted; it won't show devices that haven't talked to you. Network scanner apps work better on phones or as desktop tools: Fing, available for iOS, Android, Windows, and Mac, sweeps the network and prints device names, addresses, and manufacturers in a few seconds.
Printers are the most common target. Most printer control panels display their network address under Settings or Network, and several models print a configuration page from a menu option. Once you have the address, typing it into a browser opens the printer's web console for settings and firmware updates.
The trap here is DHCP reassigning addresses. A printer or camera that keeps the same address for months can change after a router restart. Reserve the address in the router's DHCP settings — sometimes called "address reservation" or "static lease" — so your devices stay findable. That reservation lives on the router, not the device, which is why it survives device reboots.
Look Up an Address From a Command Line When Menus Have Moved
Command-line lookups survive interface redesigns and are what support technicians ask for. Windows, macOS, and Linux all answer with a different program, and remembering three commands covers every desktop in a household.
| System | Local IP command | Public IP command | Router/gateway command |
|---|---|---|---|
| Windows 11 / 10 | ipconfig | curl ifconfig.me in PowerShell | ipconfig (Default Gateway line) |
| macOS | ipconfig getifaddr en0 | curl ifconfig.me | Option-click Wi-Fi icon |
| Linux | ip addr show | curl ifconfig.me | ip route (default via line) |
| Any system with curl | — | curl ifconfig.me | — |
Public-address lookups from the terminal depend on the service you query, not on your machine. curl ifconfig.me asks that site to echo back the address it saw; swap in any equivalent service if it's unavailable. This costs nothing and takes a second, which makes it handy for checking whether a VPN actually changed your exit address.
Be careful about advertising claims for VPNs and proxies. A VPN changes the public address websites see; it never changes your local address, and it can't hide your address from your own provider. Those are separate layers, and mixing them up leads people to buy a VPN expecting a privacy result it doesn't deliver.
A small computation shows why the public address matters more than it seems. Most home routers hand out local addresses from a pool of 254 usable addresses on a 192.168.1.x network, and every device behind that router shares one public address. If a household has 12 connected devices, those 12 local addresses collapse to a single public number at the router — that's what the web sees, and why "your" public address is really the household's.
Understand Who Sees Which Address and What It Reveals
Websites see your public address, and from it they can approximate your city through commercial geolocation databases — usually within tens of miles, sometimes wrong entirely. A site can't see your local address, your name, or your exact street. Providers can see the public addresses you use and the sites you connect to through DNS lookups, which is why DNS privacy tools exist.
Local addresses leak only inside the network. Any device on your Wi-Fi can see and contact the others; that's normal for a home network and a reason to keep the Wi-Fi password strong. Guests on a separate guest network typically can't reach your devices, and routers offer that isolation as a feature.
Your address is not a permanent identifier. Residential providers rotate it, mobile networks share it among thousands of subscribers, and VPNs replace it entirely. It is also not a secret worth panic over — every site you visit has always seen it. What matters is the behavior it enables: rate limiting, rough location, and blocking.
Static public addresses carry a cost implication worth stating plainly. A business plan's fixed address typically comes bundled with the service tier rather than as a separate line item, but providers price it differently — check the current terms with your provider rather than trusting an old figure. For home users, dynamic DNS is the cheaper workaround, and free tiers from services like DuckDNS exist while paid ones run a few dollars a year.
Fix the Common Failures Before Calling Support
A 169.254 address means no DHCP lease, and the fix is a router reboot or reconnect. Two devices with the same address — an address conflict — usually traces to a manually configured static address colliding with the router's DHCP pool; switch the device back to automatic or move the reservation into the router.
If a lookup site shows a different country than you're in, check for an active VPN or a provider routing your traffic through another region. If port forwarding fails despite correct settings, carrier-grade NAT is the likeliest culprit, and it's confirmed by the public address falling in the 100.64.0.0/10 range.
When the router's admin page won't load at its gateway address, the network may be using a different subnet, or the router may have a management interface only on a specific port. Check the router's label for a default address and login, and reset only as a last resort — a factory reset wipes your Wi-Fi name, password, and every reservation you set.
Networking questions get answered faster with the actual numbers. Copy the IPv4 address and default gateway from ipconfig, the public address from a lookup, and the device model, then ask. Vague "internet doesn't work" reports waste a support call.
One more practical check: if a remote-work tool asks for "your IP" to whitelist, it wants the public address, and that address may change on reboot. Ask the tool's administrator whether they accept a hostname via dynamic DNS instead — a workaround far cheaper than a static address in many regions.
FAQ
Can someone find my exact home address from my IP?
No — geolocation databases resolve a public address to a city or region, not a street address, and they're often wrong by tens of miles. The databases are built from provider registration and routing data, not from your home. Only a court order to your provider links an address to a subscriber. Treat anyone claiming an IP reveals a home address as misinformed.
Why does my IP change every time I restart the router?
Most residential providers assign addresses from a shared pool via DHCP and lease them for hours or days, so a reboot often returns a different number. A static address is the only fix, and providers price it by plan — confirm current terms directly. Dynamic DNS keeps a hostname pointed at whatever address you currently hold.
Do VPNs hide my IP from my internet provider?
No — the provider still sees the address it assigned you and the encrypted tunnel's endpoint, though not the sites inside the tunnel. A VPN changes what destination websites see, replacing your address with the VPN server's. If hiding traffic from the provider matters, that's a different tool question, not an IP lookup.
What's the difference between 192.168.1.1 and my IP address?
192.168.1.1 is the router's local address — your default gateway — and it's the same on millions of home networks. Your device's local address is a nearby number like 192.168.1.47 assigned by that router. Typing the gateway into a browser opens the router's admin page; typing your own device address does not.
Is 127.0.0.1 my real IP address?
No — 127.0.0.1 is the loopback address every computer reserves to talk to itself. It never appears on a network and can't be reached from another device. It turns up constantly in developer tutorials, which is why people spot it in settings and assume it's theirs.
Can I have more than one IP address at the same time?
Yes — most modern devices hold at least four: an IPv4 local address, an IPv6 local address, an IPv4 public address, and an IPv6 public address. VPNs and virtual-machine software add more local interfaces. That's why "my IP" needs a follow-up question: local or public, IPv4 or IPv6.
Why does my address start with 100.64 instead of 192.168?
That block is reserved for carrier-grade NAT, meaning your provider shares one public address among many customers. Port forwarding cannot work from behind it because there's no unique public address to forward to. Request a public address or switch plans if you need incoming connections.
What does a static IP cost compared to dynamic DNS?
Provider static-address pricing varies by country and plan, so confirm current rates with your provider; bundled business tiers often include it. Dynamic DNS free tiers exist, and paid plans typically cost a few dollars a year. For a home server reached occasionally, dynamic DNS covers the same need at the lower end.