You can change your Android ringtone from Settings > Sound & vibration (or Sound and notification on older versions) in about four taps, but the path depends on your phone maker, not just your Android version. Samsung phones route through Sounds and vibration, Pixel phones hide custom audio behind a "My Sounds" option, and carrier-locked phones sometimes block local MP3 files entirely. The method below covers the three common routes, the per-contact override, and what to do when your chosen song plays at full volume on a call but stays silent for incoming calls.
Where the Ringtone Setting Lives on Each Android Skin
Stock Android 14 and 15 on Pixel put the ringtone under Settings > Sound & vibration > Ringtone & notifications, then Phone ringtone. Samsung's One UI 6 and 7 rename the top-level tile to Sounds and vibration, and the ringtone entry sits on a submenu labeled Ringtone. Xiaomi's HyperOS keeps it under Settings > Sound & vibration > Ringtone, but duplicates the same option inside the Phone app's own settings for dual-SIM models.
The version split matters most on Android 12 and earlier. Before Android 13, the Settings app exposed a single "Phone ringtone" plus "Default notification sound," and custom files had to be dropped into the Ringtones folder at the root of internal storage. Android 13 added per-SIM ringtone assignment, so a dual-SIM Pixel or Samsung can now play a different tone for SIM 1 and SIM 2.
Motorola's My UX skin is the outlier: it buries the ringtone picker inside Settings > Sound > Advanced > Phone ringtone, three taps deeper than Pixel. If you're coming from an iPhone, expect the wording "Sounds and haptics" only on iOS—Android never uses that label, so don't search for it.
Check your Android version first under Settings > About phone > Android version. The major jump points to watch are Android 12 to 13 (per-SIM tones arrive) and Android 14 to 15 (the notification and ring volume sliders unlink on Pixel). Both shifts change what the ringtone screen shows you.
Step-by-Step: Setting a Built-In Ringtone on Stock Android
Open Settings and tap Sound & vibration. Tap Phone ringtone (or Ringtone & notifications > Phone ringtone on Android 15). Scroll the list of preloaded tones; tapping one plays a preview. Tap the tone you want, then tap Save or OK in the bottom corner.
On Android 15 Pixel, the picker also shows a "Vibrate when ringing" toggle directly beneath the list, so you can pair a silent-ish tone with haptics in the same screen. Preview playback uses the media volume, not the ring volume, so a quiet phone can still preview loudly—check the ring slider separately before assuming the tone is too soft.
If the tone list is empty or shows only "None," your phone's media storage may be unmounted. Reboot once and reopen Settings; a corrupted media index clears on restart. On Samsung, an empty list usually means a carrier firmware build stripped the default tones, and you'll need to add a custom file instead.
Adding Your Own MP3 or Audio File as a Ringtone
Android accepts MP3, M4A, OGG, and WAV files as ringtones, but placement is what makes them appear in the picker. On Pixel and most stock builds, use Settings > Sound & vibration > Phone ringtone > My Sounds > + to browse your Downloads or Files app and pick any audio file. That shortcut arrived with Android 11 and remains the fastest path; it copies the file into the system ringtone folder automatically.
On Samsung One UI, the equivalent is Settings > Sounds and vibration > Ringtone > + at the top of the list, which opens a file picker. Samsung caps custom ringtones at 30 seconds of playback in some carrier builds—anything longer loops from the start rather than playing through. If your 3-minute song gets cut at the 30-second mark, that's the cap, not a bug.
Older Android 10 and earlier devices lack the in-Settings picker entirely. Connect the phone by USB, set the transfer mode to File Transfer, and drop the audio file into the Ringtones folder at internal storage root. Media Scanner picks it up within a minute, and the file appears at the bottom of the ringtone list.
Watch for DRM-protected files from streaming services. Spotify and Apple Music downloads are encrypted and won't play as ringtones even if the file extension looks right. You need an unprotected file you own—rip a CD you bought, or use a royalty-free audio source.
Per-Contact Ringtones: The Override Most People Miss
A per-contact ringtone beats the global default and lets you know who's calling without looking. Open the Contacts app, tap the person, tap the three-dot menu or Edit, and choose Ringtone (on Samsung it's labeled "Ringtone" inside the edit screen; on Pixel it's under "Set ringtone" in the contact's overflow menu). Pick any tone, including a custom file.
This override survives a global ringtone change—switch your default from "Bright" to "Chime" and your partner's assigned tone stays put. That's the practical benefit: you can rotate the default seasonally without touching your VIP contacts.
Google Contacts sync stores per-contact ringtones locally, not in your Google account. A factory reset wipes them, and they don't carry to a new phone even after restoring contacts. Reassign them manually after a device migration; there's no bulk export.
The contact ringtone also controls the vibration pattern on Samsung, since One UI ties custom vibration to the same contact card. If a contact's call vibrates differently than everyone else's, that's why. Clear the contact's ringtone field back to "Default" to reset both.
Custom Tones for Individual Apps: Messages, WhatsApp, and Alarms
Android separates three audio channels: ringtone (calls), notification sound (messages and app alerts), and alarm sound. Changing the ringtone does nothing to your WhatsApp ping or text tone—those live under Settings > Sound & vibration > Default notification sound, or inside each app's own notification settings on Android 13 and later.
For per-app control, long-press the app icon, tap App info > Notifications, and open the specific notification channel (for example, "Messages" inside WhatsApp). Each channel has its own Sound picker, so you can give WhatsApp one tone and Telegram another. Android 8 introduced channels, and every Android version since honors them.
Messaging apps that bypass channels—some carrier SMS apps on older skins—fall back to the system notification sound. If you set a custom text tone and it doesn't change, check whether the app appears under Settings > Apps > [App] > Notifications with a channel list. No channel list means no per-app tone.
Alarm tones are separate again: Clock app > Alarm > tap an alarm > Ringtone. Setting a ringtone never touches your morning alarm, a mistake people make when their alarm suddenly plays a song they assigned to calls.
What to Do When the Ringtone Doesn't Change
The most common failure is Do Not Disturb swallowing the sound. Check Settings > Sound & vibration > Do Not Disturb—if it's on, calls from non-starred contacts ring silently regardless of your tone choice. On Pixel, DND also has a "Hide notifications" mode that suppresses the visual banner, so the phone looks dead while the tone is technically correct.
Second failure: a Bluetooth connection routes the ringtone to headphones or a car stereo you forgot was paired. Android sends call audio and ringtones over the active Bluetooth profile. Disconnect the device under Settings > Connected devices and test again.
Third: the media volume is muted while the ring volume is up, or vice versa. In Android 13 and later, the volume panel has separate sliders for Calls, Media, and Alarms. Press a volume key, tap the three-dot expander, and confirm the "Calls" slider is above zero.
Fourth: a third-party dialer app replaced the stock Phone app and ignores system ringtone settings. Check Settings > Apps > Default apps > Phone app. If it's not the stock dialer, change it there; the replacement app's own settings control the tone.
Dual-SIM and Carrier Variants: Where the Rules Change
Dual-SIM phones on Android 13 and later expose two ringtone slots, one per SIM, under Settings > Sound & vibration > Phone ringtone > SIM 1 / SIM 2. Both default to the same tone on first setup, and setting them differently is the fastest way to know which line is ringing without checking the status bar.
| Scenario | Where the ringtone setting appears | Extra constraint |
|---|---|---|
| Single-SIM Pixel on Android 15 | Sound & vibration > Phone ringtone | None |
| Dual-SIM Samsung on One UI 6 | Sounds and vibration > Ringtone > SIM 1 / SIM 2 | Per-SIM tones each capped at 30 seconds in some carrier builds |
| Carrier-locked phone (US prepaid) | Same Settings path | Custom MP3s may be blocked; only preloaded tones selectable |
| Android 10 or earlier | Sound > Phone ringtone | Custom audio must sit in /Ringtones folder |
| Xiaomi HyperOS dual-SIM | Sound & vibration > Ringtone, plus Phone app settings | Phone app setting overrides Settings app |
Carrier-locked phones sold through US prepaid channels sometimes disable custom ringtone selection to push paid ringtone services. The toggle looks present but the file picker returns "Unsupported file" for any local audio. Unlocking the phone from the carrier restores the option; there's no Settings workaround.
eSIM-only setups on Pixel 7 and later still show two slots if the phone is carrier-unlocked, even with one physical SIM absent. The second slot stays greyed out until an eSIM profile is added, which confuses people who see a disabled SIM 2 row.
Third-Party Ringtone Apps: What They Add and What They Cost
Zedge remains the most-installed ringtone app on the Play Store, with a free tier that includes ads and a paid subscription that removes them. The app downloads audio into its own folder, then offers a "Set as ringtone" button that hands the file to Android's system picker. On Android 13 and later, that handoff works cleanly; on Android 10 and earlier, it sometimes fails silently, and you'll need to move the file manually.
The real cost is storage and ad noise, not money. Zedge's free tier shows interstitial ads between downloads, and downloaded tones accumulate in a private folder that survives uninstalls only if you've saved them elsewhere. A 50-tone collection runs under 100 MB, trivial on modern phones but noticeable on 32 GB budget devices.
Audiko and Ringtone Maker offer trimming tools—slice a 4-minute track to a 30-second clip before assigning it. That matters on Samsung, where the 30-second playback cap means an untrimmed song loops awkwardly. Trim first, then assign.
Skip third-party apps if your phone is carrier-locked: the apps hand files to the same system picker that's already blocked, so they add ads without solving the problem. Unlock first, then decide whether you want an app at all. Android's built-in picker handles most needs without one.
Ringtones vs. Notification Sounds: Keeping Them Straight
Android treats these as two separate settings that people often conflate. The ringtone plays for incoming calls; the notification sound plays for texts, emails, and app alerts. Changing one leaves the other untouched, which is why your phone can ring with a new song and still ping with the old default.
Some phones let you link them. Samsung's One UI has a "Use ringtone for notifications" toggle buried in Sounds and vibration > System sound settings. Flip it on and every notification uses the call ringtone, which is convenient until a two-minute song starts playing for every text.
Sound Profile apps like Audio Control (free, ad-supported) let you bundle ringtone, notification, and alarm into named profiles you can switch with one tap. Useful if you rotate between work and weekend tones. The app needs notification-access permission to automate the switch, which is a real privacy tradeoff—grant it only if you're comfortable with an app reading your notification stream.
Google's own Digital Wellbeing doesn't manage ringtones, a misconception worth correcting. It handles screen time and focus modes, and a Focus mode can silence notifications, but it won't set or change your tone. Sound settings live in Settings, not in Wellbeing.
FAQ
Does changing my ringtone change my alarm sound too?
No—alarms live in the Clock app's own settings and are independent of the call ringtone. To change an alarm tone, open the Clock app, tap the alarm, and pick a new sound there. The system ringtone picker never touches alarms, and the reverse is also true.
Why does my custom ringtone play for calls but stay silent for texts?
Texts use the notification sound channel, which is a separate setting. Change it under Settings > Sound & vibration > Default notification sound, or per-app inside the messaging app's notification channel settings. A custom call tone has no effect on messages.
Can I set a different ringtone for each SIM on a dual-SIM Android?
Yes, on Android 13 and later the ringtone picker shows separate SIM 1 and SIM 2 slots. Assigning different tones is the quickest way to identify which line is ringing. Phones on Android 12 or earlier show only one slot regardless of SIM count.
Why won't my phone let me pick an MP3 as a ringtone?
Carrier-locked phones sometimes block local audio files to push paid ringtone services, and DRM-protected files from streaming apps won't play regardless. Check whether the file is unprotected and whether the phone is carrier-locked; unlocking restores the file picker on most models.
How do I stop a contact's custom ringtone from overriding my default?
Open the contact in the Contacts app, edit it, and set the Ringtone field back to "Default." That removes the override and the contact falls back to your global ringtone. Per-contact tones survive default changes until you clear them this way.
Is Zedge free, and does it work on all Android versions?
Zedge's free tier is ad-supported; a paid subscription removes ads. The "Set as ringtone" handoff works reliably on Android 13 and later but can fail silently on Android 10 and earlier, where you may need to move the downloaded file into the Ringtones folder manually.
Why is my ringtone quiet even at full volume?
Check three things: the Calls volume slider (separate from Media), Do Not Disturb status, and whether a Bluetooth device is connected and routing audio away from the speaker. Android 13 and later split call and media volume, so a high media slider doesn't guarantee loud calls.
Do per-contact ringtones transfer to a new phone?
No—Google Contacts doesn't sync per-contact ringtone assignments, which are stored locally on the device. After a factory reset or phone upgrade, reassign them manually. Contacts themselves restore through your Google account, but their tones don't.